Your Trusted Home Services Team in Rochester, MN

Completed preventive maintenance agreement inspection on Lennox air conditioning system. During routine testing, identified failed capacitor with degraded capacitance reading of 46.17 µF on C65A 440VAC rated component. Replaced defective capacitor with new unit to restore proper compressor and fan motor operation, ensuring system reliability and preventing potential equipment failure.

Responded to service call for Square D circuit breaker that would not reset following storm activity. Diagnosed breaker tripping issue and identified direct short in one of the existing outlets on the circuit. Replaced three defective outlets and installed weatherproof outdoor covers on exterior receptacles to provide proper protection from the elements.

Responded to no cooling complaint on residential air conditioning system. Upon arrival, confirmed outdoor fan motor operating but indoor blower not running. Diagnosed failed dual run capacitor causing indoor blower failure. Replaced defective capacitor with new TITAN HD unit, restored system operation, and verified proper cooling performance by measuring supply and return air temperature differential.

Completed preventive maintenance agreement inspection on residential air conditioning system. Upon arrival, performed comprehensive evaluation of outdoor condenser unit and indoor cassette-style air handler. During inspection, discovered excessive dust accumulation in return ductwork and recommended professional ductwork cleaning to improve system efficiency and indoor air quality. Documented equipment condition with photos showing outdoor unit positioned on concrete pad with debris accumulation around base and indoor ceiling-mounted unit. All routine maintenance tasks completed per agreement specifications.

Responded to urgent service call to inspect a sealed vent on exterior wall during active siding installation. Upon arrival, identified the opening as a fresh air intake vent that had been covered by new building wrap material. Evaluated the system and determined the fresh air intake should remain accessible and operational, advising the customer accordingly before departing the site.

Arrived on-site to assess existing tanked water heater installation and provide estimate for replacement. Conducted thorough inspection of current unit, including evaluation of copper supply piping, metallic venting system, and connection points. Documented existing equipment specifications and installation conditions through photographic documentation for estimate preparation purposes.

Responded to service call for toilet leaking at the wax ring and two faucets with difficult shutoff operation. Successfully removed and replaced defective wax ring seal at toilet base, resolving the leak issue. Inspected both faucets for worn compression washers as requested.

Responded to a basement floor drain backup caused by a blockage in the mainline drain system. Upon inspection, confirmed that the mainline stoppage was causing sewage to back up through the basement floor drain. Advised the customer to contact a specialized drain cleaning service for mainline clearance, as the blockage required equipment and expertise beyond standard plumbing service capabilities.

Responded to emergency call for shower valve malfunction with water continuously running and unable to shut off. Upon arrival, diagnosed faulty shower cartridge causing loss of water control. Successfully removed and replaced defective cartridge in single-handle shower control valve, restoring proper shut-off function and eliminating continuous water flow.

Completed return appointment for gas dryer installation, connecting yellow flexible gas line to wall-mounted shut-off valve and positioning white front-loading dryer unit next to existing washing machine. Verified all gas connections were secure and tested system for proper operation and safety compliance.

Responded to gas leak call on 39-year-old furnace unit. Upon inspection, identified gas leak at furnace gas valve and discovered extensive deterioration of heat exchanger with visible rust and cracks throughout the system. Heat exchanger showed significant corrosion and structural compromise, presenting a safety hazard for continued operation. Due to the age of the unit and severity of heat exchanger damage, unit was deemed unsafe for operation and replacement was recommended. Coordinated with office to schedule project manager for system replacement estimate.

Responded to service call for leaking water heater in residential basement utility area. Upon arrival, confirmed active leak from A.O. Smith tanked water heater requiring full unit replacement. Removed failed water heater and installed new A.O. Smith residential tanked water heater unit. Connected water supply lines, installed proper venting system using PVC piping with appropriate fittings and couplings, and ensured all connections were secure and code-compliant. Verified proper integration with existing water treatment system including blue filtration tank. Tested new water heater for proper operation, confirmed no leaks at all connection points, and ensured safe venting through ceiling infrastructure. Unit operational and performing as specified upon completion.

Responded to service call for leaking water softener system. Upon arrival, assessed the utility room and confirmed active leak from the water softener unit. Replaced the failed water softener with new unit, installing beige cylindrical softener tank with black base and white digital control valve system. Installed new Bradford White tanked water heater to replace existing unit. Connected expansion tank to water heater using proper valve assembly with manual shutoff capability. Completed all copper and galvanized pipe connections between water softener, control unit, and water heater with appropriate shut-off valves and fittings throughout the system. Verified all plumbing connections for proper operation and tested system to ensure no leaks present. Left installation clean and fully operational with all equipment functioning as designed.

Responded to service call for attic-mounted Carrier air handler unit requiring drain pan installation. Upon arrival, accessed HVAC equipment in attic space and assessed existing air handler configuration. Successfully installed new drain pan beneath the unit to provide proper condensate collection and prevent potential water damage. Verified proper positioning and secure placement of pan under the air handler. Installation completed and system ready for operation.

Responded to no cooling complaint on Lennox condensing unit. Upon inspection, identified refrigerant leak in evaporator coil. Ordered replacement coil under manufacturer warranty and scheduled follow-up appointment for installation to restore system operation.

Completed preventative maintenance agreement service on residential air conditioning system. Due to customer's breathing concerns, recommended installation of Apco X Ultra system, which combines UV light technology with carbon capture filtration to improve indoor air quality. Inspected outdoor condenser unit, verified proper operation, and documented equipment condition with photos.

Conducted site inspection of attic space to assess knob and tube wiring removal requirements. Documented existing electrical panel configuration and obsolete knob and tube wiring system running through attic joists that must be disconnected and removed prior to insulation installation. Provided estimate for complete home rewiring upgrade from two-wire to three-wire grounded system to be scheduled following priority attic remediation work.

Responded to service call for light fixture installation assistance. Homeowner had removed existing fixture but was unable to complete installation of new three-arm chandelier-style fixture. Successfully mounted and hung new black chandelier fixture from ceiling, securing all electrical connections and chain support. During testing, diagnosed faulty wall switch preventing proper fixture operation. Homeowner elected to replace switch independently and will complete installation of light globes and bulbs after switch repair.

Removed existing shower head fixture and installed customer-supplied dual shower system featuring a rainfall-style circular shower head mounted on an adjustable curved chrome arm and a handheld sprayer with flexible metal hose and wall-mounted bracket. All components were properly secured to the tiled wall, connections were tested for leaks, and the installation was verified for proper water flow and functionality.

Completed preventive maintenance agreement service on residential air conditioning system. Upon arrival, performed comprehensive AC maintenance inspection and found unit operating in good working order. Exterior condenser unit inspected, including cooling fins, refrigerant lines, electrical connections, and mounting. All components functioning properly with no issues identified. System ready for continued operation.