Your Trusted Home Services Team in Rochester, MN

Responded to service call for multiple plumbing issues including clogged drains, dishwasher leak, and laundry room sink replacement. Successfully cleared drain line for main floor guest bathroom lavatory faucet, restoring proper drainage function. Provided detailed estimate for complete laundry room sink replacement including new basin, faucet assembly, and drain installation. Documented existing conditions of bathroom sink showing normal wear and utility sink displaying heavy use with accumulated debris. All drain clearing work completed and tested for proper flow.

Conducted on-site inspection of existing recessed lighting system in vaulted ceiling area to assess feasibility for additional fixture installation. Evaluated current electrical infrastructure, switch configuration including dimmer controls, and optimal placement locations for supplemental recessed lighting to enhance illumination throughout the living space. Provided comprehensive estimate for recommended lighting upgrades based on customer requirements and existing electrical capacity.

Responded to service call for non-functioning water softener system. Upon arrival, diagnosed Culligan water softener displaying E2 error code indicating motor failure. Unable to perform repair as Culligan units require manufacturer-specific servicing, so provided customer with replacement estimate for new water treatment system.

Responded to no heat call on residential furnace system. Upon arrival, performed diagnostic testing and identified failed pressure switch preventing unit operation. Removed defective pressure switch and installed replacement component. Verified all electrical connections, tested system operation through complete heating cycle, and confirmed proper ignition sequence and burner operation. Unit restored to normal heating function.

Completed comprehensive FRM electrical inspection of residential property. Identified deficiencies including outdated electrical panel requiring upgrade to meet current code standards and improperly secured wiring in basement area necessitating re-strapping for safety compliance. Documented existing GFCI outlets in finished and unfinished areas, photographed electrical conditions throughout basement including exposed wiring on wooden framing, and provided detailed estimate for recommended corrective work to address code violations and safety concerns.

Responded to no heat call on residential furnace system. Upon inspection, identified heavily soiled air filter with significant dust accumulation restricting airflow and dirty blower wheel impeding proper operation. Removed and replaced clogged filter, then accessed air handler cabinet to clean blower wheel assembly. System restored to normal heating operation with improved airflow efficiency.

Completed comprehensive electrical inspection of residential property with focus on outlet concerns and overall system evaluation. Documented electrical panel with properly labeled circuit breakers and digital monitoring display, verified all connections secure with organized wiring entering through top conduit. Inspected auxiliary electrical installation including junction boxes, flexible metal conduit, and electronic control board housed in clear protective enclosure mounted on plywood backing. All components found to be properly installed and functioning within code specifications.

Responded to callback for gas leak on recently installed Bradford White water heater. Detected gas leaking from gas valve assembly at vent connection. Replaced defective gas valve under manufacturer warranty, verified proper operation, and confirmed no further leaks detected upon completion.

Completed preventive maintenance agreement service on Lennox air conditioning condenser unit. Performed comprehensive system inspection, cleaned condenser coils, verified fan motor operation, checked electrical connections, and confirmed unit is operating within manufacturer specifications for the upcoming cooling season.

Responded to report of water pooling in laundry room with no known source over the past several weeks. Upon arrival and inspection, identified the existing two-piece water softener system as the source of the water intrusion. Assessed the Superior Water Conditioning unit and associated plumbing connections, including copper piping, gate valves, and flexible hose connections. Provided estimate for replacement of the failing two-piece water softener system with a new Right Impressions water softener unit to resolve the ongoing water leakage issue.

Responded to no-heat call and diagnosed furnace failure to cycle. Upon inspection, determined the inducer motor had failed and was preventing the heating system from operating. Successfully replaced the defective inducer motor with new unit, restoring full furnace operation and heat to the property.

Completed preventive maintenance agreement service on residential air conditioning system. Performed comprehensive inspection and maintenance procedures on outdoor condensing unit. Upon completion of all maintenance tasks, verified system operational status and confirmed unit is functioning properly with no issues identified.

Responded to service call for dryer circuit breaker that would not reset and showed signs of moisture infiltration. Upon inspection, determined the breaker had failed and was no longer functional. Removed the defective Square D circuit breaker from the residential electrical panel and installed a new replacement breaker to restore power to the dryer circuit.

Installed GFCI outlet in laundry room to provide ground fault protection for washing machine circuit. Verified proper operation and tested reset functionality to ensure code compliance and safe operation.

Responded to service call for duct cleaning estimate at residential property. Upon arrival, conducted exterior inspection and documented gas meter installation and connections as part of preliminary assessment. Left voicemail message for customer as no answer was received during scheduled appointment window.

Responded to water leak emergency and identified multiple pinhole leaks on main water line and 1/2" copper water line beneath sink area. Successfully repaired all leaks including main line and three additional pinhole failures to restore proper water service and prevent further water damage.

Installed a new 30-amp electrical outlet in garage per customer request. Work included proper wiring from the electrical panel, secure mounting of the receptacle, and verification of correct amperage and grounding for safe operation.

Completed garbage disposal replacement in kitchen under double-basin sink with hardwired electrical connection. Replaced existing disposal unit with new black disposal, ensuring proper mounting and connection to white PVC drain assembly and P-trap configuration. Installation included verifying proper alignment with sink drain opening, securing disposal to mounting ring, and completing straight-wire electrical connection. Provided estimate for potential future work on sink and faucet replacement.

Responded to no heat call on Lennox furnace system that was blowing cold air only. Upon inspection, found air filter in poor condition and diagnosed a failed gas valve preventing proper furnace operation. Replaced gas valve with OEM part and restored heating functionality to the system.

Responded to no heat call and diagnosed complete power loss to furnace system. Inspection revealed electrical supply issue preventing unit operation. Provided temporary space heaters to maintain comfort while coordinating expedited electrical service appointment to restore power to HVAC system.