Your Trusted Home Services Team in Rochester, MN

Completed scheduled air conditioning tune-up on residential Lennox condenser unit. Performed comprehensive system inspection, verified proper operation of all components including compressor and fan assembly, checked refrigerant levels and electrical connections, and confirmed unit is operating within manufacturer specifications with no issues found.

Responded to mini split system callback and diagnosed refrigerant leak at exterior line set connections. Replaced faulty flare fittings on both liquid and suction lines, evacuated system to proper vacuum levels using micron gauge, and recharged unit to manufacturer specifications. Verified proper system operation with diagnostic equipment and confirmed all connections leak-free before completing service.

Responded to no cooling call with repeated breaker tripping on 10+ year old system. Upon inspection, discovered two dead mice and extensive nesting material in electrical disconnect box contacting high voltage terminals on contactor. Removed all rodent debris and nesting material from disconnect enclosure, cleaned affected electrical components, and replaced damaged contactor to restore safe operation and eliminate tripping condition.

Responded to no cooling call on residential air conditioning system. Upon arrival, confirmed indoor fan operational but compressor not running. Discovered rodent damage to capacitor wiring where mouse had chewed through conductor. Removed failed capacitor and installed replacement unit. Verified proper electrical connections, tested system operation, and confirmed cooling restored. Unit returned to normal operation.

Responded to service call for bathroom faucet installation on wall-mounted ceramic sink with three pre-drilled faucet holes. Upon assessment, determined that the supplied faucet was incompatible with the existing sink configuration and could not be properly installed. Advised customer to exchange the faucet for a compatible model and scheduled return visit to complete the installation once the appropriate fixture is obtained.

Responded to service call for faulty electrical outlet serving condensate pump in unfinished area. Upon arrival, identified defective outlet preventing pump operation and temporarily relocated pump power source to functioning receptacle to restore immediate functionality. Evaluated existing switch/GFCI combination installation and determined toggle switch was operating correctly. Provided estimate for GFCI outlet replacement, which was declined as switch functionality met requirements. Documented existing electrical configuration showing standard wall-mounted combination switch and GFCI receptacle with exposed framing in construction zone.

Performed AC leak search on system and identified leak at screw penetration point in evaporator coil. Ordered replacement evaporator coil for installation to restore system to proper operating condition.

Responded to service call for non-functioning patio outlets serving pond equipment. Troubleshot three exterior outlets and identified direct short in underground wiring feeding pond circuit. Provided estimates for underground wire replacement and installation of smart switch in pool house as requested.

Responded to a no-cooling complaint where the system was not maintaining desired temperature. Upon inspection, found the outdoor condenser unit heavily soiled with debris, restricting airflow through the coil. Thoroughly cleaned the outdoor unit to restore proper heat exchange and system efficiency.

Responded to callback for air conditioning unit producing abnormal whirring noise during compressor operation. Upon inspection, identified loose metal casing as the source of vibration and noise. Secured the top of the casing to eliminate movement and successfully resolved the noise issue. Unit tested and operating normally.

Responded to service call for no power to garage with panel repeatedly tripping. Performed diagnostic inspection and identified direct short in underground feeder cable supplying garage subpanel. Traced conduit run from main building to detached garage structure and located junction box with splice connections. Testing confirmed wire fault in buried circuit. Provided customer with detailed estimate for excavation and replacement of damaged underground feeder cable to restore power safely to garage.

Responded to no cooling call on residential HVAC system. Upon arrival, found thermostat unable to connect to WiFi following power outage, preventing AC operation. Diagnosed low voltage short in control wiring. Replaced faulty AC wire to restore proper system operation and thermostat functionality.

Performed comprehensive leak search on air conditioning system. Identified refrigerant leak at suction line press fitting. Coordinated with installation team to schedule repair of defective fitting.

Responded to service call for dryer vent reconnection. Successfully attached and secured dryer to existing vent system, ensuring proper connection and airflow. All connections tested and verified operational upon completion.

Responded to no cooling condition affecting entire residence. Diagnosed failed compressor capacitor on outdoor condensing unit. Removed defective capacitor and installed replacement component, restoring system to proper operation.

Responded to no cooling complaint on air conditioning system. Upon arrival, diagnosed faulty control board preventing unit operation. Removed defective White Rodgers control board and installed replacement. Verified all wire connections, tested system operation, and confirmed unit returned to normal cooling function.

Responded to no-cooling complaint where system would not cool below 78 degrees despite thermostat set to 72 degrees. Upon inspection, diagnosed low refrigerant levels and failed heat exchanger. Due to severity of both issues and cost-effectiveness, recommended complete system replacement for both indoor and outdoor units.

Responded to a main floor toilet leak caused by a heavily corroded and failing angle stop valve. Shut off the water supply to the home, then removed the deteriorated valve and old toilet supply line. Installed a new angle stop valve and supply line, restored water service to the residence, and verified proper operation with no leaks detected.

Responded to water leak in laundry room ceiling and located pinhole leak at 90-degree copper fitting on water supply line. Shut off main water supply to the home, then cut out the compromised section of copper pipe and fitting. Installed new copper pipe and 90-degree fitting using proper soldering techniques, restored water service to the home, and pressure tested the repair to confirm leak was fully resolved and system was operating correctly.

Responded to no cooling complaint on Carrier air conditioning system. Upon arrival, diagnosed failed heat exchanger in furnace and low refrigerant charge in AC unit. Presented customer with options for repair versus replacement of both furnace and air conditioning equipment due to extent of failures and system age.