Greater Rochester Area

507-282-4328

Twin Cities Metro

952-697-4328

Serving the Greater Rochester Area and the Twin Cities since 1988

K & S Heating, Air Conditioning, Plumbing, LLC BBB Business Review

Noises to be Aware of for your Furnace

ksheating_smallicon

 

Furnaces tend to be the one thing in your home that can be neglected. This is because they are usually forgotten about until an issue occurs. Make sure to have inspect the furnace on a regular basis to help ensure it operates efficiently for you. If you notice any odd noises, these should be inspected as soon as possible to help prevent further issues to the system.

If you hear a screeching noise, it may be that you have a problem with the motor, or it might be a bearing in the motor that is making the noise. If you hear a metallic chirping noise, it may just be a natural noise that the motor or the blower wheel of the fan makes when the heat first kicks on. You might be able to solve this problem yourself by wiggling the wheel, which may be out of alignment. You should also check that the mounting plate is not warped and rubbing against the blower wheel. As well, check that the motor mounts are not loose and the bearings are in good shape.

 

A noisy rattling sound when your furnace shuts off, it is probably the metal parts to your furnace cooling down. However, it may be something more serious and you should call us. If you hear a clanging noise, the problem is probably in the pipes, rather than the furnace itself. This may be caused by contraction of the pipes when the furnace turns off and the pipes cool down.

 

A loud boom or thud may lead to the ducts, which can expand and contract in cold weather, especially if the basement is not heated. It might also indicate a problem with dirty burners in the furnace. You might be able to remove and clean these yourself with hot soapy water. Make sure they are completely dry before reinstalling them. If you determine that it is not the ducts or the burners, it may be that your gas valve is defective, which can cause a delayed ignition. In most cases, it is wise to call a service technician.

 

A pinging or popping sound is most likely coming from one of the ducts and is not really something to worry about. If you hear an odd vibrating noise or whining, it may indicate a problem with your furnace and a technician really needs to check it out. A loud humming may come from the furnace burners light when temperatures dip outside. You can eliminate this noise by turning the off/pilot/on control to reduce the burner flame.

 

If you hear a rattling noise when the furnace starts up, it might be a motor bearing. A crackling noise might just be the metal parts cooling down when the furnace shuts down. A clunking and bumping sound indicates a cracked belt. With any noise that is consistent, it should be inspect to ensure the furnace is operating the best that it can.

K&S has been your trusted Heating, Air Conditioning, Plumbing and Electrical partner since 1988.

Count on our unmatched Experience and the Quality you know from K&S

4205 Highway 14 West

Rochester, MN 55901

(507) 282-4328


6513 Cecilia Cir.

Edina, MN 55435

(952) 697-4328

Recent Blog Posts